Здравейте.Не съм много добър по програмирането.Използвам следната програма за чертаене на графика Proccesing и този сорс код.:
import processing.serial.*;
int maxNumberOfSensors = 6; // Arduino has 6 analog inputs, so I chose 6
boolean fontInitialized = false; // whether the font's been initialized
Serial myPort; // The serial port
float[] previousValue = new float[maxNumberOfSensors]; // array of previous values
int xpos = 0; // x position of the graph
PFont myFont; // font for writing text to the window
void setup () {
// set up the window to whatever size you want:
size(1500, 600);
// List all the available serial ports:
println(Serial.list());
// I know that the first port in the serial list on my mac
// is always my Arduino or Wiring module, so I open Serial.list()[0].
// Open whatever port is the one you're using.
String portName = Serial.list()[0];
myPort = new Serial(this, portName, 38400);
myPort.clear();
// don't generate a serialEvent() until you get a newline (\n) byte:
myPort.bufferUntil('\n');
// create a font with the fourth font available to the system:
myFont = createFont(PFont.list()[3], 14);
textFont(myFont);
fontInitialized = true;
// set inital background:
background(0);
// turn on antialiasing:
smooth();
}
void draw () {
// nothing happens in the draw loop,
// but it's needed to keep the program running
}
void serialEvent (Serial myPort) {
// get the ASCII string:
String inString = myPort.readStringUntil('\n');
// if it's not empty:
if (inString != null) {
// trim off any whitespace:
inString = trim(inString);
// convert to an array of ints:
int incomingValues[] = int(split(inString, ","));
// print out the values
// print("length: " + incomingValues.length + " values.\t");
if (incomingValues.length <= maxNumberOfSensors && incomingValues.length > 0) {
for (int i = 0; i < incomingValues.length; i++) {
// map the incoming values (0 to 1023) to an appropriate
// graphing range (0 to window height/number of values):
float ypos = map(incomingValues, 0, 1023, 0, height/incomingValues.length);
// figure out the y position for this particular graph:
float graphBottom = i * height/incomingValues.length;
ypos = ypos + graphBottom;
// make a black block to erase the previous text:
noStroke();
fill(0);
rect(10, graphBottom+1, 110, 20);
// print the sensor numbers to the screen:
fill(255);
int textPos = int(graphBottom) + 14;
// sometimes serialEvent() can happen before setup() is done.
// so you need to make sure the font is initialized before
// you text():
if (fontInitialized) {
text("Sensor " + i + ":" + incomingValues, 10, textPos);
}
// draw a line at the bottom of each graph:
stroke(127);
line(0, graphBottom, width, graphBottom);
// change colors to draw the graph line:
stroke(64*i, 32*i, 255);
line(xpos, previousValue, xpos+1, ypos);
// save the current value to be the next time's previous value:
previousValue = ypos;
}
}
// if you've drawn to the edge of the window, start at the beginning again:
if (xpos >= width) {
xpos = 0;
background(0);
}
else {
xpos++;
}
}
}
Данните идват от Arduino посредством Bluetooth. Въпроса ми е ,някой може ли да ми каже има ли начин,по който да ми излизат по X ,Y някакви цифрови означения,за да мога от графиката да виждам стойността.
Благодаря предварително.
